Best Japanese Woodworking Tools: KAKURI, Z-SAW, Shinwa and SHAPTON Compared

Our Top Picks in Detail

KAKURI Japanese Smoothing Plane 60 mm

Best for smoothing boards and posts

KAKURI 60 mm smoothing plane

KAKURI Japanese Smoothing Plane 60 mm

A two-blade kanna from KAKURI in Sanjo, Niigata, for smoothing boards and posts on the pull stroke. Its chip breaker holds the shaving down at the cutting edge to help prevent tear-out.

Good to know

  • Naturally air-dried Japanese white oak body
  • Edge finished by hand at the factory

Keep in mind

  • Blade setting needs a small hammer, not included
  • Carbon steel needs drying and a little oil before storage

Specs KAKURI 12524 · body 77 × 258 mm, blade 60 mm · approx. 1 kg · Japanese white oak body, carbon tool steel blade

KAKURI Ebony Mini Plane No.1 Flat 18 mm

Best for crafts and fine woodwork

KAKURI ebony mini plane

KAKURI Ebony Mini Plane No.1 Flat 18 mm

A palm-size kanna for crafts and fine woodwork, with an ebony body and a high-speed steel blade. A screw adjusts the blade, so no hammer is needed.

Good to know

  • Screw adjustment
  • Storage case included

Keep in mind

  • Small format: the flat blade is 18 mm wide

Specs KAKURI No.1 Flat · body approx. 90 × 27 × 18 mm, blade 18 mm · approx. 80 g · ebony body, high-speed steel blade

Z-SAW 265 Japanese Pull Saw

Best for crosscutting wood

Z-SAW 265 pull saw

Z-SAW 265 Japanese Pull Saw

The Z-SAW 265 from Z / Okada Metal cuts on the pull stroke with a thin crosscut blade. When the blade dulls, you replace the blade rather than the whole saw.

Good to know

  • Pull-stroke cutting
  • Replaceable blade

Keep in mind

  • Sharp tool: handle with care and keep away from children

Specs Z-SAW 265 No.15003 · blade 265 mm · crosscut · replaceable blade

Shinwa Sashigane 50 cm Stainless Carpenter’s Square

Best for measuring and marking

Shinwa 50 cm sashigane

Shinwa Sashigane 50 cm Stainless Carpenter’s Square

Shinwa’s L-shaped carpenter’s square combines measuring, marking and checking 90° in one tool. The front and back carry the same metric scale.

Good to know

  • Same cm/mm scale on both sides
  • Even-thickness stainless steel; JIS standard

Keep in mind

  • Marked in metric cm and mm

Specs Shinwa No.10640 · 50 × 25 cm · stainless steel · metric cm/mm scale

Shinwa JUST-MAG Magnetic Level 150 mm

Best for Level, plumb and 45°

Shinwa JUST-MAG level

Shinwa JUST-MAG Magnetic Level 150 mm

A compact level with three vials for level, plumb and 45°, protected by a guard frame. Its magnetic base and hook give you two ways to keep it close while working.

Good to know

  • Luminous vial sheet
  • Blue, pink, silver and gold versions have the same specs

Keep in mind

  • Compact 150 mm body

Specs Shinwa JUST-MAG 150 mm · 155 × 17 × 42 mm · 127 g · accuracy within ±1.0 mm/m

SHAPTON Kuromaku Ceramic Whetstone #1000

Best for everyday sharpening

SHAPTON Kuromaku #1000

SHAPTON Kuromaku Ceramic Whetstone #1000

A #1000 medium-grit ceramic whetstone for everyday sharpening. Splash water on the surface and use its case as a base.

Good to know

  • No soaking needed
  • Made in Japan

Keep in mind

  • One grit only (#1000), not a fine finishing stone

Specs SHAPTON Kuromaku K0702 · 210 × 70 × 15 mm · ceramic · #1000 medium grit

More Japanese tools

For pruning and DIY, Kakugen’s 210 mm pull saw folds into its natural wood handle and has a lock lever to hold it open.

See all tools in our shop.

Caring for the tools

The KAKURI 60 mm plane’s carbon steel blade can rust: wipe it clean and dry after use, then apply a little oil before storing. Handle the planes and saw carefully and keep them away from children. Keep the Kakugen folding saw folded when not in use.

Frequently asked questions

How do the two KAKURI planes differ?

The full-size plane has a 60 mm blade, a chip breaker and a Japanese white oak body, with an effective planing width of 51 mm. The mini plane has an 18 mm flat high-speed steel blade and an ebony body. Blade adjustment uses a small hammer on the full-size plane and a screw on the mini.

Can I replace the Z-SAW blade?

Yes. The Z-SAW 265 has a replaceable 265 mm crosscut blade, so you can change the blade when it dulls.

Does the SHAPTON stone need soaking?

No. Splash water on the #1000 medium-grit ceramic stone before sharpening. Its case doubles as a base.

Are the JUST-MAG colors different specifications?

No. Blue, pink, silver and gold have the same specs: 155 × 17 × 42 mm, 127 g, with accuracy within ±1.0 mm/m.

Do you ship to my country, and is there a multi-buy discount?

We ship to 24 countries, including the US, Canada, Australia, New Zealand and much of Europe, with free standard shipping (faster EMS is available at checkout). Any 2 eligible items are 10% off and 3 or more are 15% off; the discount is applied in the cart.

Everything here ships direct from Japan.