Our Top Picks in Detail

Best for everyday wire stripping
FUJIYA KUROKIN wire stripper
FUJIYA KUROKIN Wire Stripper Type A PP323A-165-BG
A wire stripper from FUJIYA’s black-and-gold KUROKIN series for stripping, cutting and bending everyday electrical wire. AWG and mm markings help you find the right hole.
Good to know
- Return spring opens the tool after stripping
- Lock keeps it closed
Keep in mind
- Not insulated; never use on live wires
Specs PP323A-165-BG · 167 mm · solid AWG 10–20, stranded AWG 12–22

Best for fine electronics wire
HOZAN P-967 fine-wire stripper
HOZAN Wire Stripper for Fine Wire P-967
HOZAN’s slim stripper is made for fine wire in electronics work. A built-in cutter and plier tip let you do more than remove insulation.
Good to know
- One-hand lock for storage
- Light at 80 g
Keep in mind
- Not insulated; never use on live wires
Specs P-967 · 163 mm · 80 g · elastomer grips · solid AWG 18–28, stranded AWG 20–30

Best for VCTF flat cords
HOZAN P-90-F cord stripper
HOZAN P-90-F Wire Stripper
The P-90-F strips VCTF flat cords and their 2-core sheaths in one squeeze. Its strip gauge lets you set the length for repeated work.
Good to know
- Fits VCTF 0.75 and 1.25 mm²
- Replaceable blade (P-915)
Keep in mind
- Adjusting the strip gauge requires a 2.5 mm hex key
Specs P-90-F · 165 mm · 350 g · VCTF 0.75 / 1.25 mm² · strip gauge 4–25 mm

Best for two connector types
Lobtex AKM1 Multi Mini
Lobtex Lobster Multi Mini Crimping Tool AKM1
Two rows of dies put insulated closed-end connectors and bare terminals in one crimper. Choose it when your work uses both connector types and you want less switching between tools.
Good to know
- Built-in ratchet crimp check
- Made in Japan
Keep in mind
- Check Japanese CE and mm² sizes before buying; connectors and terminals are not included
Specs AKM1 · 214 mm · 325 g · steel body, elastomer grip · CE1, CE2, CE5 and bare 1.25 / 2 mm²

Best for Closed-end connectors
Marvel MH-125 Hand Press
Marvel Hand Press MH-125
A small Hand Press dedicated to insulated closed-end connectors. One click holds the connector so you can feed in the wires before completing the crimp.
Good to know
- Dies have a crimp mark for each size
- Made in Japan
Keep in mind
- CE-8 is not supported; connectors are not included
Specs MH-125 · 182 mm · 250 g · polypropylene handle · CE-1, CE-2, CE-5

Best for bare terminals and sleeves
Marvel MH-14 / MH-38
Marvel Hand Press Crimping Tool for Bare Terminals & Sleeves
Marvel’s Hand Press for bare terminals and sleeves comes in two sizes. The MH-14 covers 1.25, 2, 5.5, 8 and 14 mm²; the longer MH-38 covers 8, 14, 22 and 38 mm².
Good to know
- One-click terminal pre-hold and crimp marks
- JIS-marked and made in Japan
Keep in mind
- For bare terminals and sleeves in JIS sizes; terminals and sleeves are not included
Specs MH-14 / MH-38 · 243 mm / 334 mm · 405 g / 686 g · TPE grips · 1.25–14 / 8–38 mm²

Best for cutting VA/VVF cable
FUJIYA 7700N-200BG nippers
FUJIYA KUROKIN Offset Thin-Blade Nippers 7700N-200BG
FUJIYA’s thin-blade nippers use an offset joint for more leverage when cutting thick copper wire and VA/VVF cable. It cuts VA/VVF cable up to 2.6 mm × 3 cores.
Good to know
- Offset joint reduces the hand force needed
- Made in Japan
Keep in mind
- Not insulated; never use on live wires
Specs 7700N-200BG · 208 mm · 320 g · copper up to 3.5 mm, VA/VVF 2.6 mm × 3 cores

Best for Cable, plastic and paper
FUJIYA KUROKIN straight scissors
FUJIYA KUROKIN Electrician’s Straight Scissors FM04-180NL-BG
Straight scissors for sheathed cable, soft plastic and paper. A one-hand stopper closes the blades for carrying in a pouch.
Good to know
- Cuts flat VA/VVF cable 2.0 mm × 3 cores
- Light at approx. 107 g
Keep in mind
- Not insulated; do not use on live electrical wires
Specs FM04-180NL-BG · approx. 188 mm · approx. 107 g · soft plastic φ20 mm, VA/VVF 2.0 mm × 3 cores

Best for carrying tools and parts
TSUNODA LOCX tool pouch
TSUNODA LOCX Detachable Tool Pouch
The LOCX pouch detaches while its loops stay on your belt, so you can change the pouch for the job. Choose three tiers for more rows of pockets or two tiers for a slimmer setup.
Good to know
- Built-in plate helps the pouch keep its shape
- Fits belts up to 53 mm wide and 3 mm thick
Keep in mind
- Belt, tools and other pictured accessories are not included
Specs LX-PO3B / LX-PO2B · about 363 × 180 × 163 mm / about 363 × 180 × 138 mm · about 619 g / about 564 g · 1680-denier polyester, EVA core

Best for keeping hand tools apart
TSUNODA LOCX pliers holder
TSUNODA LOCX Detachable Pliers Holder
Stepped slots separate your hand tools, and the LOCX buckle lets the holder detach while the loop stays on your belt. Choose two pliers slots, three pliers slots, or the wider screwdriver-and-pliers version.
Good to know
- Hidden release lever helps prevent accidental release
- Fits belts up to 53 mm wide and 3 mm thick
Keep in mind
- Belt, tools and pens are not included
Specs LX-CP2B / LX-CP3B / LX-SDI2B · about 361 × 82 × 65 mm / about 361 × 82 × 72 mm / about 378 × 105 × 60 mm · about 270 g / about 310 g / about 270 g · 1680-denier polyester, EVA core, steel rivets

Best for scraps and small parts
TSUNODA LOCX magnetic dust cup
TSUNODA LOCX Dust Cup with Neodymium Magnet
A stiff cup for cable scraps and offcuts, with a magnet on the hanger for screws and small metal parts. Size S also holds a spray can; size M gives you a taller, wider cup for bigger offcuts.
Good to know
- Snap hook and shaped fitting help prevent spinning
- Hard body stays open
Keep in mind
- Keep the magnet away from cards, phones and other magnetic-sensitive items
- Belt, tools and other LOCX parts are not included
Specs LX-DCS1 / LX-DCM1 · about 270 × 100 × 124 mm / about 322 × 120 × 142 mm · about 186 g / about 264 g · polyester, EVA core, neodymium magnet
More electrician tools and LOCX accessories
FUJIYA nippers with a simple crimper, a detachable LOCX hammer holder, and a removable liner for the LOCX pouches.
FUJIYA KUROKIN 760N-175BG Offset Thin-Blade Nippers$79.80
TSUNODA LOCX Detachable Hammer Holder LX-HA1B$54.80
TSUNODA LOCX Inner Case LX-IP1$54.80See all tools in our shop.
Frequently asked questions
Which stripper is for fine electronics wire?
The HOZAN P-967 is made for fine electronics wire: AWG 18–28 solid and AWG 20–30 stranded. The FUJIYA PP323A-165-BG covers AWG 10–20 solid and AWG 12–22 stranded, while the HOZAN P-90-F is for VCTF 0.75 and 1.25 mm² cords.
Can one crimper handle closed-end connectors and bare terminals?
The Lobtex AKM1 has separate die rows for insulated closed-end connectors CE1, CE2 and CE5, and bare terminals and sleeves in 1.25 and 2 mm². Check the size on your connectors and terminals before buying.
Are these tools insulated for live electrical work?
The FUJIYA PP323A-165-BG stripper, HOZAN P-967 stripper, FUJIYA 7700N-200BG nippers and FUJIYA FM04-180NL-BG scissors are not insulated: never use them on live wires.
Do all LOCX accessories use the detachable buckle?
The tool pouch and pliers holders detach with LOCX buckles while their loops stay on the belt. The dust cup hangs from a snap hook instead. Work belts and the tools shown in the photos are not included.
Do you ship to my country, and is there a multi-buy discount?
We ship to 24 countries, including the US, Canada, Australia, New Zealand and much of Europe, with free standard shipping (faster EMS is available at checkout). Any 2 eligible items are 10% off and 3 or more are 15% off; the discount is applied in the cart.



















