Our Top Picks in Detail

Best for everyday wire and cable ties
Fujiya KUROKIN 770-150BG
FUJIYA KUROKIN 770-150BG Heavy-Duty Nippers 150 mm
An everyday nipper from Fujiya’s black-and-gold KUROKIN line. The offset joint gives strong, smooth cuts, and the round blade trims cable ties flush.
Good to know
- Strong, smooth cuts for its size
- Shackle for a safety lanyard
Keep in mind
- For very thick wire, a high-leverage cutter is easier
Specs Fujiya · 162 mm · 170 g · shackle for a safety lanyard

Best for thick copper wire, flush cuts
LOBTEX J-CRAFT 99 Power Nipper
LOBTEX J-CRAFT 99 Power Nipper JB165PWNU
The top range from LOBTEX (Lobster Tool) in Osaka. An offset pivot cuts thick wire with less force, and the thin flat blade leaves clean, flush cuts.
Good to know
- Cuts three-core VVF 2.0 mm cable
- Slim elastomer grips
Keep in mind
- Not insulated: never use on live wires
Specs LOBTEX, Osaka · 168 mm · 180 g · VVF 2.0 mm × 3

Best for electrical work and hard wire
Tsunoda Power Diagonal Cutter 200
Tsunoda Power Diagonal Cutter PW-SN200TG
A long, high-leverage cutter from Tsunoda in Sanjo, Niigata. The power head bites through stainless and copper wire, and a simple crimping die and a staple puller are built in.
Good to know
- Three tools in one
- Cuts copper wire up to 4.0 mm
Keep in mind
- At 200 mm, less handy in tight spaces
- Not insulated: never use on live wires
Specs Tsunoda, Sanjo · 201 mm · crimping die and staple puller

Best for flush cuts in tight spots
Tsunoda King TTC AN-150B (90°)
Tsunoda King TTC 90° Angled Flush Nipper AN-150B
The head is bent at 90°, so the flat blades sit right against the surface and cut flush: plastic gates, cable ties and pins that ordinary nippers can’t reach.
Good to know
- Leaves almost no stub
- Spring opens it after each cut
Keep in mind
- Light duty on steel: soft iron up to 1.2 mm
Specs Tsunoda, Sanjo · 144 mm · 135 g · plastic 5 mm, copper 2.0 mm

Best for model kits: little or no sanding
GodHand Ultimate Nipper SPN-120
GodHand Ultimate Nipper SPN-120
GodHand’s ultra-thin single-edge nipper for plastic model kits. It cuts gates so cleanly that little or no sanding is needed.
Good to know
- Very clean gate cuts
- Blade cap included
Keep in mind
- Plastic only: metal or hard material can chip the blade
- Right-handed
Specs GodHand, Niigata · 120 mm · 60 g · plastic up to 3 mm · blade cap

Best for model kits for less
3.peaks Model Pro MK-02
3.peaks Model Pro Single-Edge Plastic Nipper MK-02
A light single-edge hobby nipper from 3.peaks. The thin 7° blade slices plastic gates with very little white stress mark, and a spring opens it softly after each cut.
Good to know
- Lower price than the GodHand
- Only 58 g
Keep in mind
- Plastic only: do not cut metal wire
Specs 3.peaks, Niigata · 120 mm · 58 g · S58C steel, HRC 54–60

Best for Brass, aluminum and copper rods
GodHand Metal Rod Nipper SWN-165
GodHand Metal Rod Nipper SWN-165
Made for the metal wire and rods used in models, crafts and jewelry. The thick blades cut brass and aluminum cleanly, and a second slice cut leaves an even flatter end.
Good to know
- Clean ends, less filing
- Copper up to 4 mm
Keep in mind
- Not for steel or piano wire
Specs GodHand, Niigata · 165 mm · 165 g · grips and blade cap

Best for gripping small parts
Fujiya KUROKIN 350-150BG long nose
Fujiya KUROKIN Long Nose Pliers 350-150BG
Long nose pliers from the KUROKIN line. The fine tips reach into tight spots, the cross-knurled jaws hold wire firmly, and a return spring opens the handles for you.
Good to know
- Fine tips for tight spots
- Return spring
Keep in mind
- For thick wire, use a nipper or the power pliers
Specs Fujiya · 160 mm · 135 g · 40.5 mm jaws · return spring

Best for cutting and twisting thick wire
Fujiya KUROKIN 3000N power pliers
FUJIYA KUROKIN High-Leverage Power Pliers 3000N-225BG
Lineman’s pliers with an off-center pivot for extra leverage, so they cut thick wire with less force. A crimping die and a shackle for a safety lanyard are built in.
Good to know
- Grips, twists and cuts
- Cuts piano wire up to 2.0 mm
Keep in mind
- Heavy, about 340 g
- Not insulated: never use on live wires
Specs Fujiya, Higashiosaka · 232 mm · 340 g · crimping die and shackle

Best for stripped and rusted screws
ENGINEER NejiSaurus GT PZ-58
ENGINEER NejiSaurus GT PZ-58
Screw removal pliers. The vertical teeth bite into stripped, rusted or tamper-proof screw heads, so you can grip them and turn them out without drilling.
Good to know
- Saves drilling out a damaged screw
- Built-in wire cutter
Keep in mind
- The screw head must stand out enough to grip
Specs ENGINEER · 160 mm · 130 g · cuts soft iron wire 2.6 mm
More Japanese cutters and pliers
SUPER TOOL Strong Nipper H SN150$49.80
3.peaks Precision Nipper SN-130$64.80
FUJIYA KUROKIN Ultra-Light Combination Pliers 230-165-BG$49.80
FUJIYA KUROKIN Slim Water Pump Pliers 110-250S-BG$54.80
FUJIYA KUROKIN Forged Mini Bolt Clipper PC21-200-BG$64.80
FUJIYA KUROKIN Electrician’s Straight Scissors FM04-180NL-BG$59.80
HOZAN P-90-F Wire Stripper$59.80See all Japanese tools in our shop.
Frequently asked questions
What is the difference between a nipper and pliers?
In Japan, a nipper is a cutting tool, like a diagonal or end cutter. Pliers are mainly for gripping, bending and twisting, though many, such as the Fujiya power pliers and the NejiSaurus, also cut wire.
Which nipper is best for model kits?
The GodHand Ultimate Nipper SPN-120 is made to cut gates so cleanly that little or no sanding is needed. The 3.peaks MK-02 is a lighter, lower-priced single-edge nipper. Both are for plastic only; for brass or aluminum rods, use the GodHand SWN-165.
Which of these cut piano wire?
The Fujiya power pliers cut piano wire up to 2.0 mm, and the Fujiya forged mini bolt clipper (in the list above) up to 3 mm. The hobby nippers and the GodHand SWN-165 are not for piano wire.
Are these the Japanese versions?
Yes. They are bought in Japan, so packaging and labels are in Japanese.
Do you ship to my country, and is there a multi-buy discount?
We ship to 24 countries, including the US, Canada, Australia, New Zealand and much of Europe, with free standard shipping (faster EMS is available at checkout). Any 2 eligible items are 10% off and 3 or more are 15% off; the discount is applied in the cart.


















