Kei Truck Engine Parts from Japan: Gaskets, Thermostats and Plug Wires for Acty and Sambar

Our Top Picks in Detail

NGK Spark Plug Wire Set RC-HE60 for Honda Acty HA3/HA4

Best for acty E07A ignition

NGK RC-HE60

NGK Spark Plug Wire Set RC-HE60 for Honda Acty HA3/HA4

NGK’s wire set for the manual-transmission HA3 / HA4 follows the original Honda wire lengths and ends, with no cutting or crimping. It includes the long plug boots and a separate coil wire.

Good to know

  • Resistor core helps reduce ignition noise
  • Replaces Honda wire set 32722-PZ3-010

Keep in mind

  • Not for the HA3 with automatic transmission; compare the old Honda part number

Specs NGK RC-HE60 · Acty HA3 / HA4, manual transmission · 660 cc E07A · 1990–1999 · 3 plug wires + 1 coil wire · metal-wound resistor core, silicone rubber jacket

K.P Cylinder Head Gasket HE802 for Honda Acty HA3/HA4

Best for acty E07A head repairs

K.P HE802 head gasket

K.P Cylinder Head Gasket HE802 for Honda Acty HA3/HA4

A metal head gasket from K.P Gasket for the E07A engine in the HA3 / HA4 truck and HH3 / HH4 van. Its bore, water and oil openings follow the E07A head.

Good to know

  • Made in Japan
  • Replaces Honda 12251-P64-004 / 12251-PZ1-004

Keep in mind

  • Head bolts, other gaskets, coolant and oil are not included
  • Installation needs a torque wrench and a flat, clean head; ask a mechanic if unsure

Specs K.P HE802 · Acty HA3 / HA4 · 660 cc E07A · 1990–1999 · 1 metal head gasket · replaces Honda 12251-P64-004 / 12251-PZ1-004

Ohno Rubber Valve Cover Gasket Set SP-0005 for Honda Acty HA3/HA4

Best for acty E07A valve covers

Ohno SP-0005 gasket set

Ohno Rubber Valve Cover Gasket Set SP-0005 for Honda Acty HA3/HA4

This Ohno Rubber set brings together the valve cover gasket, spark-plug-tube O-rings and cover-bolt washers for the E07A. Everything you need to reseal the valve cover on the HA3 / HA4 engine, apart from tools and sealant.

Good to know

  • Made in Japan
  • Individual part numbers are printed on the bags

Keep in mind

  • Tools and liquid gasket sealant are not included

Specs Ohno Rubber SP-0005 · Acty HA3 / HA4 · 660 cc E07A · 1990–1999 · 1 gasket + 3 plug-tube O-rings + 4 washers · replaces Honda 12030-P64-000 / 12030-PFB-000

Ohno Steering Rack Boot Set RP-2092/RP-2093 for Honda Acty HA3/HA4

Best for acty steering rack boots

Ohno RP-2092 / RP-2093

Ohno Steering Rack Boot Set RP-2092/RP-2093 for Honda Acty HA3/HA4

A pair of steering rack boots for the HA3 / HA4, with the different left and right sizes supplied together. They replace cracked boots that let dirt and water reach the rack.

Good to know

  • Made in Japan; new clamps included
  • Replaces Honda 53537-SJ6-000 and 53538-SJ6-000

Keep in mind

  • The tie rod end must be removed for installation; grease and tools are not included

Specs Ohno RP-2092 / RP-2093 · Acty HA3 / HA4 · 1990–1999 · 2 steering rack boots with clamps · right about 152.5 mm long, left about 164 mm long

Ohno Coolant Reserve Tank HS-2065 for Honda Acty HA3/HA4

Best for acty coolant tank replacement

Ohno HS-2065 reserve tank

Ohno Coolant Reserve Tank HS-2065 for Honda Acty HA3/HA4

A direct replacement for a yellowed or cracked Acty coolant reserve tank. The clear white tank makes the coolant level easier to read.

Good to know

  • Replaces Honda 19101-PN3-000
  • Listed for Acty Truck HA1 / HA2 / HA3 / HA4

Keep in mind

  • Cap, hoses, bracket and coolant are not included; reuse the old cap and hose

Specs Ohno Rubber HS-2065 · Acty HA1 / HA2 / HA3 / HA4 · 1 coolant reserve tank · replaces Honda 19101-PN3-000 · clear white

Sanwa Cylinder Head Gasket HG403 for Honda Acty HA6/HA7/HA8/HA9

Best for acty E07Z head repairs

Sanwa HG403 head gasket

Sanwa Cylinder Head Gasket HG403 for Honda Acty HA6/HA7/HA8/HA9

Sanwa Packing’s metal head gasket is made for the E07Z head and block. It covers the HA6 / HA7 and HA8 / HA9 trucks, plus the HH5 / HH6 van.

Good to know

  • Made in Japan by Sanwa Packing Industry
  • Replaces Honda 12251-RV4-004

Keep in mind

  • Not for the 1990–1999 Acty HA3 / HA4 with the E07A engine
  • Head bolts, other gaskets, coolant and oil are not included

Specs Sanwa HG403 · Acty HA6 / HA7 / HA8 / HA9 · 660 cc E07Z · 1999 and later · 1 metal head gasket · replaces Honda 12251-RV4-004

Miyaco Thermostat TS-127P for Honda Acty HA6/HA7/HA8/HA9

Best for acty E07Z cooling

Miyaco TS-127P thermostat

Miyaco Thermostat TS-127P for Honda Acty HA6/HA7/HA8/HA9

This Miyaco thermostat is listed for the E07Z-powered Acty trucks and HH5 / HH6 van. It opens at 78°C and includes the figure-8 rubber gasket.

Good to know

  • Rubber gasket supplied with the thermostat
  • Replaces Honda 19301-PFE-003 / 19301-PFE-004

Keep in mind

  • Not for the 1990–1999 Acty HA3 / HA4 with the E07A engine
  • Coolant and tools are not included

Specs Miyaco TS-127P · Acty HA6 / HA7 and HA8 / HA9 · 660 cc E07Z · HA6 / HA7: 1999–2009 · 78°C opening temperature + rubber gasket · replaces Honda 19301-PFE-003 / 19301-PFE-004

NGK Spark Plug Wire Set RC-FE37

Best for sambar KS ignition

NGK RC-FE37

NGK Spark Plug Wire Set RC-FE37

NGK’s five-wire resistor cable set is listed for the KS3 / KS4 Sambar, with different fitment dates for each engine variant. It replaces all five wires together.

Good to know

  • Complete five-wire set
  • Resistor cable helps reduce ignition noise

Keep in mind

  • Not for supercharged KS3 / KS4 built 03/1990–08/1991 or LPG models from 10/1996
  • KV3 / KV4 vans need a separate fitment check by body type and year

Specs NGK RC-FE37 · Sambar KS3 / KS4 · EN07 · carburetor 03/1990–02/1999; EMPi 10/1995–02/1999; supercharged 09/1991–02/1999; LPG 03/1990–09/1996 · 5 wires

K.P Cylinder Head Gasket HE704 for Subaru Sambar KS3/KS4

Best for sambar KS head repairs

K.P HE704 head gasket

K.P Cylinder Head Gasket HE704 for Subaru Sambar KS3/KS4

K.P Gasket’s metal head gasket is listed for the EN07 engine in the 1990–1998 KS3 / KS4 truck and KV3 / KV4 van. Compare the Subaru part number on your old gasket before ordering.

Good to know

  • Made in Japan
  • Replaces Subaru 11044-KA203 / 11044-KA193 / 11044-KA192

Keep in mind

  • Head bolts, other gaskets, coolant and oil are not included
  • Installation needs a torque wrench and a flat, clean head; ask a mechanic if unsure

Specs K.P HE704 · Sambar KS3 / KS4 · 660 cc EN07 · 1990–1998 · 1 metal head gasket · replaces Subaru 11044-KA203 / 11044-KA193 / 11044-KA192

Miyaco Thermostat TS-124P for Subaru Sambar KS3/KS4

Best for sambar KS cooling

Miyaco TS-124P thermostat

Miyaco Thermostat TS-124P for Subaru Sambar KS3/KS4

A replacement thermostat for the EN07-powered KS3 / KS4 truck and KV3 / KV4 van. It opens at 78°C and comes with the rubber gasket.

Good to know

  • Gasket included
  • Replaces Subaru 21200-KA121 / 21200-KA122

Keep in mind

  • Compare the old Subaru part number; coolant and tools are not included

Specs Miyaco TS-124P · Sambar KS3 / KS4 · 660 cc EN07 · 1990–1998 · 78°C opening temperature + rubber gasket · replaces Subaru 21200-KA121 / 21200-KA122

Musashi Valve Cover Gasket TP9011K for Subaru Sambar KS3/KS4 & TT1/TT2

Best for sambar valve cover resealing

Musashi TP9011K gasket kit

Musashi Valve Cover Gasket TP9011K for Subaru Sambar KS3/KS4 & TT1/TT2

Musashi’s kit combines the valve cover gasket and six cover-bolt O-rings for the Sambar EN07. The same kit is listed for both KS3 / KS4 and later TT1 / TT2 trucks.

Good to know

  • Cover gasket and bolt O-rings supplied together
  • Also listed for Sambar KV3 / KV4 and TV1 / TV2 vans

Keep in mind

  • Compare the Subaru gasket number; tools and liquid gasket sealant are not included

Specs Musashi TP9011K · Sambar KS3 / KS4 and TT1 / TT2 · 660 cc EN07 · KS3 / KS4: 1990–1999; TT1 / TT2: 1999–2012 · 1 valve cover gasket + 6 bolt O-rings

NGK Spark Plug Wire Set RC-FE60

Best for sambar TT ignition

NGK RC-FE60

NGK Spark Plug Wire Set RC-FE60

NGK’s RC-FE60 supplies four numbered plug wires for the TT1 / TT2 truck and TV1 / TV2 van. Its ferrite-core resistor construction helps reduce ignition noise.

Good to know

  • Made in Japan
  • Wires numbered 1 to 4

Keep in mind

  • No coil wire; the earlier KS3 / KS4 uses a different set

Specs NGK RC-FE60 · Sambar TT1 / TT2 · EN07 · February 1999–April 2012 · 4 numbered plug wires, no coil wire · metal resistance wire wound on a ferrite core, about 8 kΩ/m

More kei truck steering parts

HKB steering wheel boss kits for the Suzuki Carry, Mitsubishi Minicab and Subaru Sambar; check each kit’s chassis, return-pin and airbag requirements.

See all kei truck parts and accessories in our shop.

Frequently asked questions

Do the Acty E07A and E07Z parts have the same fitment?

No. K.P HE802 and Ohno SP-0005 cover the 1990–1999 HA3 / HA4 with the E07A engine. Sanwa HG403 and Miyaco TS-127P are listed for the E07Z-powered HA6 / HA7 / HA8 / HA9; neither fits the E07A HA3 / HA4.

Which NGK wire set fits my Sambar?

RC-FE60 is listed for TT1 / TT2 trucks and TV1 / TV2 vans with the EN07 engine from February 1999 to April 2012. RC-FE37 is listed for KS3 / KS4 trucks, with separate dates for carburetor, EMPi, supercharged and LPG variants. Check those dates and exclusions before ordering; KV3 / KV4 van fitment also depends on body type and year.

Are these parts made in Japan?

NGK RC-FE60, Sanwa HG403, K.P HE704 and HE802, Ohno SP-0005 and the Ohno steering rack boots are made in Japan. All of the parts are bought in Japan, with Japanese packaging and labels.

Do the head gaskets include everything for the repair?

No. The Sanwa and K.P head gaskets here are supplied as one gasket each. Head bolts, other gaskets, coolant and oil are not included, and the listings call for a torque wrench and a flat, clean head.

Do you ship to my country, and is there a multi-buy discount?

We ship to 24 countries, including the US, Canada, Australia, New Zealand and much of Europe, with free standard shipping (faster EMS is available at checkout). Any 2 eligible items are 10% off and 3 or more are 15% off; the discount is applied in the cart.

Everything here ships direct from Japan.