Best Japanese Nippers & Pliers: Fujiya, Tsunoda, LOBTEX and GodHand Compared

Our Top Picks in Detail

FUJIYA KUROKIN 770-150BG Heavy-Duty Nippers 150 mm

Best for everyday wire and cable ties

Fujiya KUROKIN 770-150BG

FUJIYA KUROKIN 770-150BG Heavy-Duty Nippers 150 mm

An everyday nipper from Fujiya’s black-and-gold KUROKIN line. The offset joint gives strong, smooth cuts, and the round blade trims cable ties flush.

Good to know

  • Strong, smooth cuts for its size
  • Shackle for a safety lanyard

Keep in mind

  • For very thick wire, a high-leverage cutter is easier

Specs Fujiya · 162 mm · 170 g · shackle for a safety lanyard

LOBTEX J-CRAFT 99 Power Nipper JB165PWNU

Best for thick copper wire, flush cuts

LOBTEX J-CRAFT 99 Power Nipper

LOBTEX J-CRAFT 99 Power Nipper JB165PWNU

The top range from LOBTEX (Lobster Tool) in Osaka. An offset pivot cuts thick wire with less force, and the thin flat blade leaves clean, flush cuts.

Good to know

  • Cuts three-core VVF 2.0 mm cable
  • Slim elastomer grips

Keep in mind

  • Not insulated: never use on live wires

Specs LOBTEX, Osaka · 168 mm · 180 g · VVF 2.0 mm × 3

Tsunoda Power Diagonal Cutter PW-SN200TG

Best for electrical work and hard wire

Tsunoda Power Diagonal Cutter 200

Tsunoda Power Diagonal Cutter PW-SN200TG

A long, high-leverage cutter from Tsunoda in Sanjo, Niigata. The power head bites through stainless and copper wire, and a simple crimping die and a staple puller are built in.

Good to know

  • Three tools in one
  • Cuts copper wire up to 4.0 mm

Keep in mind

  • At 200 mm, less handy in tight spaces
  • Not insulated: never use on live wires

Specs Tsunoda, Sanjo · 201 mm · crimping die and staple puller

Tsunoda King TTC 90° Angled Flush Nipper AN-150B

Best for flush cuts in tight spots

Tsunoda King TTC AN-150B (90°)

Tsunoda King TTC 90° Angled Flush Nipper AN-150B

The head is bent at 90°, so the flat blades sit right against the surface and cut flush: plastic gates, cable ties and pins that ordinary nippers can’t reach.

Good to know

  • Leaves almost no stub
  • Spring opens it after each cut

Keep in mind

  • Light duty on steel: soft iron up to 1.2 mm

Specs Tsunoda, Sanjo · 144 mm · 135 g · plastic 5 mm, copper 2.0 mm

GodHand Ultimate Nipper SPN-120

Best for model kits: little or no sanding

GodHand Ultimate Nipper SPN-120

GodHand Ultimate Nipper SPN-120

GodHand’s ultra-thin single-edge nipper for plastic model kits. It cuts gates so cleanly that little or no sanding is needed.

Good to know

  • Very clean gate cuts
  • Blade cap included

Keep in mind

  • Plastic only: metal or hard material can chip the blade
  • Right-handed

Specs GodHand, Niigata · 120 mm · 60 g · plastic up to 3 mm · blade cap

3.peaks Model Pro Single-Edge Plastic Nipper MK-02

Best for model kits for less

3.peaks Model Pro MK-02

3.peaks Model Pro Single-Edge Plastic Nipper MK-02

A light single-edge hobby nipper from 3.peaks. The thin 7° blade slices plastic gates with very little white stress mark, and a spring opens it softly after each cut.

Good to know

  • Lower price than the GodHand
  • Only 58 g

Keep in mind

  • Plastic only: do not cut metal wire

Specs 3.peaks, Niigata · 120 mm · 58 g · S58C steel, HRC 54–60

GodHand Metal Rod Nipper SWN-165

Best for Brass, aluminum and copper rods

GodHand Metal Rod Nipper SWN-165

GodHand Metal Rod Nipper SWN-165

Made for the metal wire and rods used in models, crafts and jewelry. The thick blades cut brass and aluminum cleanly, and a second slice cut leaves an even flatter end.

Good to know

  • Clean ends, less filing
  • Copper up to 4 mm

Keep in mind

  • Not for steel or piano wire

Specs GodHand, Niigata · 165 mm · 165 g · grips and blade cap

Fujiya KUROKIN Long Nose Pliers 350-150BG

Best for gripping small parts

Fujiya KUROKIN 350-150BG long nose

Fujiya KUROKIN Long Nose Pliers 350-150BG

Long nose pliers from the KUROKIN line. The fine tips reach into tight spots, the cross-knurled jaws hold wire firmly, and a return spring opens the handles for you.

Good to know

  • Fine tips for tight spots
  • Return spring

Keep in mind

  • For thick wire, use a nipper or the power pliers

Specs Fujiya · 160 mm · 135 g · 40.5 mm jaws · return spring

FUJIYA KUROKIN High-Leverage Power Pliers 3000N-225BG

Best for cutting and twisting thick wire

Fujiya KUROKIN 3000N power pliers

FUJIYA KUROKIN High-Leverage Power Pliers 3000N-225BG

Lineman’s pliers with an off-center pivot for extra leverage, so they cut thick wire with less force. A crimping die and a shackle for a safety lanyard are built in.

Good to know

  • Grips, twists and cuts
  • Cuts piano wire up to 2.0 mm

Keep in mind

  • Heavy, about 340 g
  • Not insulated: never use on live wires

Specs Fujiya, Higashiosaka · 232 mm · 340 g · crimping die and shackle

ENGINEER NejiSaurus GT PZ-58

Best for stripped and rusted screws

ENGINEER NejiSaurus GT PZ-58

ENGINEER NejiSaurus GT PZ-58

Screw removal pliers. The vertical teeth bite into stripped, rusted or tamper-proof screw heads, so you can grip them and turn them out without drilling.

Good to know

  • Saves drilling out a damaged screw
  • Built-in wire cutter

Keep in mind

  • The screw head must stand out enough to grip

Specs ENGINEER · 160 mm · 130 g · cuts soft iron wire 2.6 mm

More Japanese cutters and pliers

See all Japanese tools in our shop.

Frequently asked questions

What is the difference between a nipper and pliers?

In Japan, a nipper is a cutting tool, like a diagonal or end cutter. Pliers are mainly for gripping, bending and twisting, though many, such as the Fujiya power pliers and the NejiSaurus, also cut wire.

Which nipper is best for model kits?

The GodHand Ultimate Nipper SPN-120 is made to cut gates so cleanly that little or no sanding is needed. The 3.peaks MK-02 is a lighter, lower-priced single-edge nipper. Both are for plastic only; for brass or aluminum rods, use the GodHand SWN-165.

Which of these cut piano wire?

The Fujiya power pliers cut piano wire up to 2.0 mm, and the Fujiya forged mini bolt clipper (in the list above) up to 3 mm. The hobby nippers and the GodHand SWN-165 are not for piano wire.

Are these the Japanese versions?

Yes. They are bought in Japan, so packaging and labels are in Japanese.

Do you ship to my country, and is there a multi-buy discount?

We ship to 24 countries, including the US, Canada, Australia, New Zealand and much of Europe, with free standard shipping (faster EMS is available at checkout). Any 2 eligible items are 10% off and 3 or more are 15% off; the discount is applied in the cart.

Everything here ships direct from Japan.